Will not fit 2018 and up models.Multi use pannier rack can be used with
hard pannier cases
soft luggage
rotopax
Made from 3/4 inch steel tubing,powder coated comes with all the hardware that you need to install your own cases.
Installation:
Please see the video below.
remove seat
remove the upper footpeg bracket bolt
drill a pilot hole thru the 2 holes from the top make sure the drill is smaller than the thread
drill 2 holes from the bottom in the plastic with a bigger drill 5/8 inch
Install the cross mounting bracket with the 2X 50 mm spacers and 90 mm bolts
install right-side rack with the m8x35 mm bolt and 8mm spacer at the footpeg and use the m8x25 mm bolt at the crossbar
install left side the same way
connect the 2 sides with the crossbar and m8x25mm bolts
tighten all bolts